4209 silicon steel core lubricating antirust oil
Introduction:
4209 silicon steel core lubricating antirust oil is based on the deep refined mineral oil and mixed with a variety of composite additives. It is suitable for the lubrication of the die when the silicon steel sheet in AC contact is blanking and the an
Detailed introduction
summary:
Silicon steel core lubricating antirust oil is based on the deep refined mineral oil and mixed with a variety of composite additives. It is suitable for the lubrication of the die when the silicon steel sheet in AC contact is blanking and the antirust of the core after processing. It is also suitable for the medium and short-term sealing and antirust of other ferrous metals.
[performance features]
Good antirust property, can be used as the medium and short-term sealing and antirust of iron core and other ferrous metals after processing; ◎ certain lubricity, can be used as the lubrication of stamping die when the silicon steel sheet in AC contact falls off; ◎ the silicon steel core coated with oil can be directly assembled, without affecting the power off release of AC contactor; ◎ the oil film has the automatic repair performance.
[executive standard]
The product meets the following specifications: Q / sh303387-2006.
[typical data]
[purpose]
It is suitable for the lubrication of die during blanking of silicon steel sheet in AC contact and the rust prevention of iron core after processing, and also suitable for the medium and short term sealing and rust prevention of other ferrous metals.
[precautions]
The metal parts shall be derusted, cleaned and dried before use;
When in use, it can be brushed, dipped or sprayed;
Do not touch the oiled metal parts directly by hand to avoid damaging the formed protective oil film;
Do not mix with other oil products.
[packaging]
20L plastic barrel, 200L iron barrel or packing according to the user's requirements.
Silicon steel core lubricating antirust oil is based on the deep refined mineral oil and mixed with a variety of composite additives. It is suitable for the lubrication of the die when the silicon steel sheet in AC contact is blanking and the antirust of the core after processing. It is also suitable for the medium and short-term sealing and antirust of other ferrous metals.
[performance features]
Good antirust property, can be used as the medium and short-term sealing and antirust of iron core and other ferrous metals after processing; ◎ certain lubricity, can be used as the lubrication of stamping die when the silicon steel sheet in AC contact falls off; ◎ the silicon steel core coated with oil can be directly assembled, without affecting the power off release of AC contactor; ◎ the oil film has the automatic repair performance.
[executive standard]
The product meets the following specifications: Q / sh303387-2006.
[typical data]
|
Project |
4209 silicon steel core lubricating antirust oil |
|
Kinematic viscosity (40 ℃), mm 2 / S |
12.90 |
|
Flash point (open)，℃ |
156 |
|
water content |
mark |
|
Pour point，℃ |
-21 |
|
corrosion test（100"C，3h) |
|
|
T3Copper strip |
qualified |
|
45#Steel sheet |
qualified |
|
Damp heat test (steel sheet，49"C±1C，Alevel），d |
12 |
It is suitable for the lubrication of die during blanking of silicon steel sheet in AC contact and the rust prevention of iron core after processing, and also suitable for the medium and short term sealing and rust prevention of other ferrous metals.
[precautions]
The metal parts shall be derusted, cleaned and dried before use;
When in use, it can be brushed, dipped or sprayed;
Do not touch the oiled metal parts directly by hand to avoid damaging the formed protective oil film;
Do not mix with other oil products.
[packaging]
20L plastic barrel, 200L iron barrel or packing according to the user's requirements.
Previous:4210 water based antirust agent Next:4211 synthetic antirust oil
