7017-1 high temperature grease
Introduction:
7017-1 high temperature lubricating grease is a kind of high and low temperature lubricating grease which is thickened with special organic thickener and refined with a variety of efficient additives.
Detailed introduction
summary:
7017-1 high temperature lubricating grease is a kind of high and low temperature lubricating grease which is thickened with special organic thickener and refined with a variety of efficient additives.
[performance features]
Good high and low temperature performance, especially excellent high temperature performance, long bearing life under high temperature;
Good water resistance, suitable for bearing lubrication in humid environment;
Good oxidation resistance to ensure long-term use at high temperature;
Good rust resistance to ensure that the bearing parts are not rusted.
[executive standard]
The product meets the following specifications: sh0431-92 (1998).
[purpose]
This product is suitable for the field work in high temperature, high speed or severe cold area and the lubrication of rolling bearing in wide temperature range over 200 ° C. For example, thrust bearing of aviation motor, electric appliance and clutch, high temperature fan and racing wheel bearing. Lubrication of bearings for high temperature operation, such as plastic stretch stretcher, polyester heat setting machine, resin finishing machine, molten salt pump, motor, long ring steamer, high temperature dyeing cylinder, steamer, preshrunk machine, etc.
Applicable temperature range: - 60 ℃ ~ + 250 ℃, up to 280 ℃ in short term.
[products with equivalent performance abroad]
This oil product has the same performance as shell AeroShell grease 15a, Mobil grease24 and knuckle unlsdow tk44n2.
[precautions]
This product should be stored in a clean, dry and dark place;
Before use, clean the lubricating parts, air dry or blow dry, and then add the product;
Do not mix with other oils;
After use, the cover shall be sealed in time to prevent impurities.
[packaging]
1 kg plastic box, 16 kg plastic bucket or according to customer requirements.
7017-1 high temperature lubricating grease is a kind of high and low temperature lubricating grease which is thickened with special organic thickener and refined with a variety of efficient additives.
[performance features]
Good high and low temperature performance, especially excellent high temperature performance, long bearing life under high temperature;
Good water resistance, suitable for bearing lubrication in humid environment;
Good oxidation resistance to ensure long-term use at high temperature;
Good rust resistance to ensure that the bearing parts are not rusted.
[executive standard]
The product meets the following specifications: sh0431-92 (1998).
[typical data]
| project | Typical data |
| appearance | Grey even cream |
| Drop point、℃ | >330 |
| Conicity（1/4Conicity），0.1mm | 72 |
| Evaporation（20CTC），%（m/m) | 0.75 |
| Pressure oil separation,%(m/m) | 7.34 |
| Similar viscosity(-50℃,10s-1），pa.s | 1492 |
| corrosion(T3Copper strip，100℃.3h） | qualified |
| chemically stable（0.78MPaOxygen pressure，100℃，100h），Pressure drop，MPa | 0 |
This product is suitable for the field work in high temperature, high speed or severe cold area and the lubrication of rolling bearing in wide temperature range over 200 ° C. For example, thrust bearing of aviation motor, electric appliance and clutch, high temperature fan and racing wheel bearing. Lubrication of bearings for high temperature operation, such as plastic stretch stretcher, polyester heat setting machine, resin finishing machine, molten salt pump, motor, long ring steamer, high temperature dyeing cylinder, steamer, preshrunk machine, etc.
Applicable temperature range: - 60 ℃ ~ + 250 ℃, up to 280 ℃ in short term.
[products with equivalent performance abroad]
This oil product has the same performance as shell AeroShell grease 15a, Mobil grease24 and knuckle unlsdow tk44n2.
[precautions]
This product should be stored in a clean, dry and dark place;
Before use, clean the lubricating parts, air dry or blow dry, and then add the product;
Do not mix with other oils;
After use, the cover shall be sealed in time to prevent impurities.
[packaging]
1 kg plastic box, 16 kg plastic bucket or according to customer requirements.
Previous:4606 (DOT-4) synthetic brake fluid Next:7019-1 extreme pressure high temperature grease
