7409-1 thread lubricating grease for drilling tools
Introduction:
7409-1 drilling tool thread lubricating grease is prepared by thickening semi synthetic oil with soap based thickener, adding extreme pressure additive and solid filler such as soft metal powder.
Detailed introduction
summary:
The product is made from the semi synthetic oil thickened with soap based thickener and refined with solid filler such as extreme pressure additive and soft metal powder.
[performance features]
This product has excellent high and low temperature performance, anti-wear, extreme pressure, anti medium, anti sticking and sealing performance.
[executive standard]
The product meets the following specifications: Q / sh 037 · 141-88 (97) standard.
[typical data]
[purpose]
This product is suitable for sealing and lubricating the threads of drill collars and drill pipe assemblies used in oil and gas fields and geological exploration and drilling. Under the working condition of high temperature, high load and high torque stress, it can prevent mud leakage, avoid thread scratch and thread sticking, and is convenient for disassembly and cleaning.
Applicable temperature range: - 35 ℃ ~ + 200 ℃.
[precautions]
Before use, clean the threaded joint with kerosene or other solvents, dry it or blow it dry before use
Apply the product;
Do not mix with other oils;
After use, the end of the barrel shall be tight in time to prevent impurities and corrosive media from mixing, so as to avoid affecting the use effect.
[packaging]
20kg plastic bucket or packing according to customer's requirements.
The product is made from the semi synthetic oil thickened with soap based thickener and refined with solid filler such as extreme pressure additive and soft metal powder.
[performance features]
This product has excellent high and low temperature performance, anti-wear, extreme pressure, anti medium, anti sticking and sealing performance.
[executive standard]
The product meets the following specifications: Q / sh 037 · 141-88 (97) standard.
[typical data]
|
Project |
Quality index |
|
appearance |
Grey green even ointment |
|
Conicity，0.1mm |
340～385 |
|
Evaporation（150℃，），％（m/m）Not greater than |
10.0 |
|
Corrosion (45 steel sheet, 100 ℃, 3H) |
qualified |
|
Similar viscosity (- 30 ℃, 10s-1), Pa.s is not more than |
2200 |
This product is suitable for sealing and lubricating the threads of drill collars and drill pipe assemblies used in oil and gas fields and geological exploration and drilling. Under the working condition of high temperature, high load and high torque stress, it can prevent mud leakage, avoid thread scratch and thread sticking, and is convenient for disassembly and cleaning.
Applicable temperature range: - 35 ℃ ~ + 200 ℃.
[precautions]
Before use, clean the threaded joint with kerosene or other solvents, dry it or blow it dry before use
Apply the product;
Do not mix with other oils;
After use, the end of the barrel shall be tight in time to prevent impurities and corrosive media from mixing, so as to avoid affecting the use effect.
[packaging]
20kg plastic bucket or packing according to customer's requirements.
Previous:No Data Next:7414 Gun Gear Grease
