Contact
Service hotline: 400-688-7804
Tel: 0769-87886500
0769-82621675
Fax: 0769-82621676
Technology: 156-0260-4248 (wechat same number)
Investment promotion: 180-2519-7509 (wechat same number)
Email: jmsha@ssorn.com
jmsh@ssorn.com
website: www.ccjmsh.com
Location:Home > Product Center > Sealing lubricant > > Read
7603 stem sealant
Pubdate:2020-01-09 14:16:39
Detailed introduction
summary:
The product is made of polymer thickened synthetic oil and solid filler.
[performance features]
This product has good thermal stability and lubricity;
Sealing and mechanical stability;
Good resistance to medium erosion.
[executive standard]
This product conforms to Q / sh 037 · 097-97 standard.
[typical data]
[purpose]
This product is applicable to the secondary sealing device of the hydraulic BOP and its hydraulic ram valve of the wellhead equipment of oil and gas fields
For sealing and lubrication. For steam, ammonia, hydrocarbon gas, dilute acid, air, oil and other media
Auxiliary seal of high temperature valve stem. The operating temperature can reach above + 600 ℃. The pressure can reach 60MPa.
[products with equivalent performance abroad]
This oil has the same performance as DuPont, f-26 and vitona.
[precautions]
This product is a plastic rod sealant, which is not easy to cure. It can be made at will according to the specific situation
Fill in different sealing parts after type;
This product is non-toxic, so it does not need to take special protective measures when it is used, and it will not make
Damage caused;
Do not mix with other oils;
Store in a cool, dark and dry place.
[packaging]
150g / plastic box or packing according to customer's requirements.
The product is made of polymer thickened synthetic oil and solid filler.
[performance features]
This product has good thermal stability and lubricity;
Sealing and mechanical stability;
Good resistance to medium erosion.
[executive standard]
This product conforms to Q / sh 037 · 097-97 standard.
[typical data]
|
Project |
Quality index |
|
appearance |
Black plastic rod |
|
1/4No working cone penetration，0.1mm |
10～30 |
|
Evaporation（200℃），％（m/m） |
determination |
|
Corrosion (45 steel sheet, 100 ℃, 3H) |
qualified |
This product is applicable to the secondary sealing device of the hydraulic BOP and its hydraulic ram valve of the wellhead equipment of oil and gas fields
For sealing and lubrication. For steam, ammonia, hydrocarbon gas, dilute acid, air, oil and other media
Auxiliary seal of high temperature valve stem. The operating temperature can reach above + 600 ℃. The pressure can reach 60MPa.
[products with equivalent performance abroad]
This oil has the same performance as DuPont, f-26 and vitona.
[precautions]
This product is a plastic rod sealant, which is not easy to cure. It can be made at will according to the specific situation
Fill in different sealing parts after type;
This product is non-toxic, so it does not need to take special protective measures when it is used, and it will not make
Damage caused;
Do not mix with other oils;
Store in a cool, dark and dry place.
[packaging]
150g / plastic box or packing according to customer's requirements.
Previous:7602 high temperature sealant Next:7607 air brake system sealing grease
