Contact
Service hotline: 400-688-7804
Tel: 0769-87886500
0769-82621675
Fax: 0769-82621676
Technology: 156-0260-4248 (wechat same number)
Investment promotion: 180-2519-7509 (wechat same number)
Email: jmsha@ssorn.com
jmsh@ssorn.com
website: www.ccjmsh.com
Location:Home > Product Center > Metalworking lubricants > > Read
M1019 synthetic cutting paste
Pubdate:2020-01-10 16:17:56
Detailed introduction
summary:
M1019 synthetic cutting paste is made of refined mineral oil and anionic surfactant. It is suitable for cooling and lubricating in the process of cutting and drawing ferrous metal workpieces. The recommended concentration is 5% - 10%.
[performance features]
The emulsion mixed with water has the properties of cooling, lubricating, washing and anticorrosion. It is a general cooling lubricant for metal cutting.
[executive standard]
This product conforms to Q / sh303039-2006 standard.
[typical data]
[purpose]
It is mainly used for the cooling and lubrication of ferrous metal parts in the processing process, and can also be used as non-ferrous metal wire rod
Drawing lubricant;
The recommended dilution concentration is 5% - 10%.
[precautions]
This product should not be mixed with other metal processing oil;
When blending the emulsion, the product should be adjusted to a liquid form with a small amount of hot water and then diluted to the desired concentration in cold water.
[packaging]
15kg plastic bucket, 175KG iron bucket or packaging according to the user's requirements.
M1019 synthetic cutting paste is made of refined mineral oil and anionic surfactant. It is suitable for cooling and lubricating in the process of cutting and drawing ferrous metal workpieces. The recommended concentration is 5% - 10%.
[performance features]
The emulsion mixed with water has the properties of cooling, lubricating, washing and anticorrosion. It is a general cooling lubricant for metal cutting.
[executive standard]
This product conforms to Q / sh303039-2006 standard.
[typical data]
|
Project |
U8132Fast bright quenching oil |
|
|
Kinematic viscosity（40℃)mm 2 /s |
34 |
|
|
Flash point (open)，℃ |
210 |
|
|
water content |
nothing |
|
|
Corrosion a copper, 100 "C, 3H), grade |
1 | |
|
Pour point, ℃ |
-9 |
|
|
Cooling characteristics (SH/T 0220) |
Characteristic temperature, ℃ |
630 |
|
800"C~400"Ctime，s |
3.6 |
|
It is mainly used for the cooling and lubrication of ferrous metal parts in the processing process, and can also be used as non-ferrous metal wire rod
Drawing lubricant;
The recommended dilution concentration is 5% - 10%.
[precautions]
This product should not be mixed with other metal processing oil;
When blending the emulsion, the product should be adjusted to a liquid form with a small amount of hot water and then diluted to the desired concentration in cold water.
[packaging]
15kg plastic bucket, 175KG iron bucket or packaging according to the user's requirements.
Previous:M0531 copper tube drawing oil Next:M3012 synthetic grinding fluid
