Contact
Service hotline: 400-688-7804
Tel: 0769-87886500
0769-82621675
Fax: 0769-82621676
Technology: 156-0260-4248 (wechat same number)
Investment promotion: 180-2519-7509 (wechat same number)
Email: jmsha@ssorn.com
jmsh@ssorn.com
website: www.ccjmsh.com
Location:Home > Product Center > Metalworking lubricants > > Read
M00251 EDM oil
Pubdate:2020-01-10 15:22:23
Detailed introduction
summary:
EDM oil is based on the deep refined mineral oil and mixed with a variety of composite additives. It is suitable for the working fluid in the EDM process. The product is divided into two grades of m0251 and m0252 according to the kinematic viscosity at 40 ℃.
[performance features]
Low sulfur and aromatics, non-toxic, tasteless, can significantly improve the working environment;
Low viscosity, good fluidity, good cooling and chip removal, which can make the electrode and workpiece surface
The surface is cooled rapidly, and the corrosion products of electrode gap are eliminated in time;
High flash point and good safety.
[executive standard]
The product meets the following specifications: Q / sh303 047-2006.
[typical data]
[purpose]
Suitable for all kinds of EDM machine tools, used as the working fluid of EDM.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
EDM oil is based on the deep refined mineral oil and mixed with a variety of composite additives. It is suitable for the working fluid in the EDM process. The product is divided into two grades of m0251 and m0252 according to the kinematic viscosity at 40 ℃.
[performance features]
Low sulfur and aromatics, non-toxic, tasteless, can significantly improve the working environment;
Low viscosity, good fluidity, good cooling and chip removal, which can make the electrode and workpiece surface
The surface is cooled rapidly, and the corrosion products of electrode gap are eliminated in time;
High flash point and good safety.
[executive standard]
The product meets the following specifications: Q / sh303 047-2006.
[typical data]
|
Project |
EDM oil |
|
|
Brand |
M0251 |
M0252 |
|
Kinematic viscosity（40℃)mm 2 /s |
1.489 |
2.234 |
|
Corrosion test (copper, 100C, 3 hours) |
qualified |
qualified |
|
Flash point (closed), ℃ |
78 |
101 |
|
Moisture,% (mass fraction) |
nothing |
nothing |
Suitable for all kinds of EDM machine tools, used as the working fluid of EDM.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
200L iron barrel or packing according to the user's requirements.
Previous:Lw-1000 high temperature thread anti sticking agent Next:M0010 grinding oil
