Contact
Service hotline: 400-688-7804
Tel: 0769-87886500
0769-82621675
Fax: 0769-82621676
Technology: 156-0260-4248 (wechat same number)
Investment promotion: 180-2519-7509 (wechat same number)
Email: jmsha@ssorn.com
jmsh@ssorn.com
website: www.ccjmsh.com
Location:Home > Product Center > Metalworking lubricants > > Read
M0010 grinding oil
Pubdate:2020-01-09 15:54:49
Detailed introduction
summary:
M0010 grinding oil is based on the deep refining of high-quality mineral oil and synthetic oil, mixed with high-performance imported additives. It is suitable for the processing technology of strong grinding of high-performance machine tools, and its performance reaches the quality level and use effect of imported similar oil products.
[performance features]
Excellent cooling and lubricating performance, suitable for high-performance machine tools with high efficiency processing requirements, able to meet the requirements of
Excellent surface finish and precision requirements, extend tool life;
The oil meets the requirements of safety, health and environmental protection, without irritation, bad smell and non-toxic;
Good oxidation resistance, good iron powder separation, can extend the service life of oil.
[executive standard]
This product meets the following specifications: Q / sh303038-2003.
[typical data]
[purpose]
It is suitable for machining and lubrication of all kinds of metal cutting and grinding processes, especially for imported machine tools, such as ANCA's high-grade tool grinder.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
20L plastic barrel, 200L iron barrel or packaging according to user's requirements.
M0010 grinding oil is based on the deep refining of high-quality mineral oil and synthetic oil, mixed with high-performance imported additives. It is suitable for the processing technology of strong grinding of high-performance machine tools, and its performance reaches the quality level and use effect of imported similar oil products.
[performance features]
Excellent cooling and lubricating performance, suitable for high-performance machine tools with high efficiency processing requirements, able to meet the requirements of
Excellent surface finish and precision requirements, extend tool life;
The oil meets the requirements of safety, health and environmental protection, without irritation, bad smell and non-toxic;
Good oxidation resistance, good iron powder separation, can extend the service life of oil.
[executive standard]
This product meets the following specifications: Q / sh303038-2003.
[typical data]
Project |
M0010Grinding oil |
Kinematic viscosity(40℃)mm 2 /s |
7.013 |
Flash point (open),℃ |
165 |
Pour point,℃ |
—24 |
copper corrosion |
1b |
Maximum no seizure load(Pb),N |
588 |
It is suitable for machining and lubrication of all kinds of metal cutting and grinding processes, especially for imported machine tools, such as ANCA's high-grade tool grinder.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
20L plastic barrel, 200L iron barrel or packaging according to user's requirements.
Previous:M00251 EDM oil Next:M0017a honing oil