Contact
Service hotline: 400-688-7804
Tel: 0769-87886500
0769-82621675
Fax: 0769-82621676
Technology: 156-0260-4248 (wechat same number)
Investment promotion: 180-2519-7509 (wechat same number)
Email: jmsha@ssorn.com
jmsh@ssorn.com
website: www.ccjmsh.com
Location:Home > Product Center > Metalworking lubricants > > Read
M0017a honing oil
Pubdate:2020-01-10 15:05:14
Detailed introduction
summary:
M0017a honing oil is based on highly refined mineral oil and blended with high performance imported additives. It is suitable for the lubrication and cooling of honing process.
[performance features]
Excellent lubrication performance can improve the finish and precision of the machined surface;; good cooling performance can reduce the working temperature during machining;
Good oxidation resistance, can prolong the service life of oil;
It meets the requirements of safety, health and environmental protection.
[executive standard]
This product meets the following specifications: Q / sh303038-2003.
[typical data]
[purpose]
It is mainly used in honing of ferrous metal with excellent lubrication performance, especially for lubrication and cooling of engine cylinder and other occasions with high finish.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
20L plastic barrel, 200L iron barrel or packaging according to the user's requirements.
M0017a honing oil is based on highly refined mineral oil and blended with high performance imported additives. It is suitable for the lubrication and cooling of honing process.
[performance features]
Excellent lubrication performance can improve the finish and precision of the machined surface;; good cooling performance can reduce the working temperature during machining;
Good oxidation resistance, can prolong the service life of oil;
It meets the requirements of safety, health and environmental protection.
[executive standard]
This product meets the following specifications: Q / sh303038-2003.
[typical data]
Project |
M0017A Honing oil |
appearance |
Yellowish brown uniform liquid |
Kinematic viscosity(40℃)mm 2 /s |
8.167 |
Flash point (open),℃ |
145 |
Maximum no seizure load(Pb),N |
1020 |
It is mainly used in honing of ferrous metal with excellent lubrication performance, especially for lubrication and cooling of engine cylinder and other occasions with high finish.
[precautions]
It shall be stored in a clean and dry place. After being used, it shall be covered tightly in time. During use, it shall be cleaned to avoid impurities;
Do not mix with other oil products;
It refers to the environmental temperature, specific process conditions, oil economy and the safety requirements of customers.
[packaging]
20L plastic barrel, 200L iron barrel or packaging according to the user's requirements.